Gathering the required items
  • Home Assistant installation on your board (e.g. Raspberry Pi or Home Assistant Blue), latest updates installed.
  • SkyConnect dongle and cable.

Setting up a new Zigbee network using SkyConnect

Step 1

Plug the extension cable into SkyConnect
  1. Plug the Home Assistant SkyConnect into the USB extension cable.
  2. Plug the extension cable into your Home Assistant instance.
  3. USB 3.0 ports and USB 3.0 drives can cause interference with 2.4 GHz protocols, including the ones provided by Home Assistant SkyConnect. It is important to use the USB extension cable and to position the Home Assistant SkyConnect away from possible interference sources.
    This video shows the effect of interference.

Step 2

Locate the SkyConnect integration
  1. Go to Settings > Devices & Services
  2. SkyConnect should now have been discovered.
  3. Select Configure.

Step 3

Set up the SkyConnect integration
  • Select Submit to start the setup process.

Step 4

Locate the SkyConnect integration
  • Select Create a network.

Step 5

Add devices to area
  1. Once the network has been set up, add the Zigbee Coordinator to an area.
  2. Select Finish.
    • Your Zigbee devices are now added to your Zigbee network.

Step 6

Add Zigbee devices
  • Click on Devices link and select Add device on the lower right corner. ZHA will now search for Zigbee devices in pairing mode.
  • Put your Zigbee device into pairing mode.
  • If ZHA can't find your Zigbee device make sure that SkyConnect does not suffer from interference. Use the extension cable and try placing the SkyConnect further away from potential devices which can cause interference.
Home Assistant SkyConnect   –   Contact   –   GitHub   –   Discord#zigbee